QR Code Generator
Make a QR code in three steps
Paste a link or text (up to 2,000 characters), choose an error-correction level, dot pattern and colors, then click Generate. The preview updates so you can check the result before you download it as PNG or SVG, or copy the image straight into a document or slide. Everything runs in your browser, so what you type is not sent to our servers.
QR Code Preview
Enter content and click Generate to see preview.
Free QR Code Generator
This is the all-purpose generator. If you are encoding something with a fixed format, such as a WiFi login, a contact card or a map pin, the dedicated tools in the Related Tools section build the correct data string for you.
What can a QR code contain?
A QR code is simply a container for text. Your phone decides what to do with it based on the format of that text:
- Website link: opens in the browser. For campaign links see the URL and Website QR generators.
- Plain text: displays the text. Useful for serial numbers, short notes or codes.
- WiFi login: joins a network without typing the password.
- Email, SMS and phone: open a pre-filled message or the dialer.
- Contact card (vCard): offers an “Add contact” prompt.
- Location and event: open a map pin or add a calendar entry.
Error-correction levels: which one to choose
QR codes carry redundant data so a code still scans when part of it is dirty, scratched or covered. More redundancy means better survival but also more modules (the small squares), so the code becomes denser and each square becomes smaller at the same print size.
- Low (7%): the smallest, simplest code. Best for clean screens and short content, such as a code on a slide or web page.
- Medium (15%): the sensible default. Good for flyers, menus, business cards and packaging.
- Quartile (25%): choose it when the code may wear or sit on textured material, such as handled brochures, stickers or outdoor posters.
- High (30%): for rough environments (equipment labels, vehicles, shop floors) or when a logo covers the center. Plan a larger print size because the pattern is denser.
Rule of thumb: pick the lowest level that suits the environment, then print the code a little larger.
Static vs dynamic QR codes
Static codes (what this generator makes) store your data directly in the pattern. They are free, never expire, work offline and involve no third party. The trade-off is that you cannot edit the destination after printing, and there are no scan statistics.
Dynamic codes store a short redirect link owned by a provider, which forwards to your current destination. You can edit the target and see scan counts, but they usually need a subscription, and if it lapses the printed codes stop working. Scans also pass through the provider’s servers.
A practical middle path: if a printed code might need to change, encode a link on your own domain (for example yourbrand.com/menu) and redirect it whenever you like. You get the flexibility of a dynamic code without depending on a vendor.
Print size and contrast
- Size: keep printed codes at least about 2 × 2 cm (0.8 × 0.8 in) for close-range scanning. For distance, use the 10:1 rule: a code scanned from 1 meter away should be about 10 cm wide.
- Quiet zone: leave a blank margin of at least four modules around the code. Do not let borders, text or photos touch it.
- Contrast: dark code on a light background. Black on white is the safest. Light-on-dark (inverted) codes fail on some scanners.
- Resolution: use SVG for large or professional printing. If you use PNG, print it at 300 DPI at the size you need and never stretch a small image.
- Surface: matte paper scans better than glossy. Avoid curved or reflective surfaces where possible.
Why a QR code fails to scan
- Too dense: a long URL plus high error correction packs in too many modules. Shorten the link, lower the level or print larger.
- Weak contrast or unusual colors: pale foregrounds and low-contrast brand colors are the most common cause.
- Quiet zone cropped: the margin was trimmed by a layout or a border.
- Too small or too far away: apply the 10:1 rule.
- Blurry or upscaled image: export a larger PNG or use SVG.
- Logo too big: it should never cover the three large corner squares.
- Glare or damage: reflections, creases or wear beyond the correction level.
- Bad data: a typo, or a link missing https://.
Always test the final printed version with at least two phones (one iPhone and one Android) before printing a large batch.
Frequently Asked Questions
What should I enter in the QR Code Generator?
Any link or text up to 2,000 characters. For a website, paste the full address including https://. For formats like WiFi, email or contact cards, use the dedicated generator so the data is structured correctly.
Which error-correction level should I choose?
Use Medium (15%) for most printed and digital uses. Choose Quartile or High if the code will be outdoors, handled often or carry a logo, and print it larger to compensate for the denser pattern.
How big should a printed QR code be?
At least about 2 × 2 cm for close-range scanning, with a clear margin around it. For posters or signs viewed from a distance, make the code roughly one-tenth of the scanning distance.
Do QR codes made here expire?
No. They are static: the data is part of the image, so the code works for as long as the destination link or content stays valid. If the destination moves, you will need to generate and reprint a new code.
Why won’t my QR code scan?
The usual causes are low contrast, a cropped margin, a code that is too small or too dense, or a blurry image. Increase the size, use dark-on-light colors, lower the data length and test on two different phones.
